5 0.30 2.4 21 0.50 2.7 1.7 + - 0.10 0 5.8 0.30 0.7 1 2 3 1.6 notes dimensions are in millimeters weight: part number 5 4 3 2 initial release a 2:1 0.5 mm 541.323.4202 20802 sockeye place #130 800 x: 11/7/2012 rohs compliant 1 x.xx: 0.3 mm x.x: 877.670.7118 www.tensility.com fax bend, or 97701 usa 0.05 mm tolerances: nickel plated, molding type, white insulators scale: sheet 1 of 1 size a description: connector, dc plug, 4.75x1.7xl21mm, brass, function test: no open, no short circuit, no int date description revision 50-00316 tel 541.323.3228 materials ?? 1. insulator, pbt + 15% glass fiber, white ?? 2. shell, c2700 brass, 2 m nickel plated ?? 3. spring contact, c5191 phosphor bronze, 2 m nickel ?? plated ?? ?? electrical requirements ?? dielectric strength: 1 min @ 500 vac ?? insulation resistance: 100 m ? @ 500 vdc ?? contact resistance: 30 m ? or less ?? rated voltage: 20 vdc ?? rated current: 6 a ?? mechanical requirements ?? insertion force: 0.5-3 kgf ?? withdrawal force: 0.4-2 kgf ?? durability: 5000 mating cycles while maintaining; 0.3-2 kgf ?? insertion force, 0.2-1.5 kgf withdrawal force and a less than ?? 100 m ? contact resistance. ?? environmental requirements ?? damp test: 40 c, rh 90-100% for 96 hrs. cool to ambient ?? and recover for 2 hours. maintain dielectric strength of 500 ?? vac for 1 min, insulation resistance of 50 m ? @ 500 vdc ?? minimum and a contact resistance of 100 m ? or less. ?? ?? dry test: 70 c, rh 70-85% for 96 hrs. cool to ambient and ?? recover for 2 hours. maintain insulation resistance of 50 ?? m ? @ 500 vdc minimum and a contact resistance of 100 ?? m ? or less. ?? ?? salt spray test: 35 c, rh 90-95% , 5% nacl mist for 24 hrs. ?? wash parts after test. maintain mechanical requirements ?? and a contact resistance of less than 80 m ? . ?? operating range ?? -25 to 70 c, relative humidity of 85% or less 1.7 0.20 4.7 0.10 16.7 0.30 3.5 1.5 0.10 0.5 0.20 1.5 4.75 + - 0.10 0
|